Hallo zusammen,
Das Internet ist leer gesucht. Ich konnte nichts finden, wie ich den Hisense U7HQ in Homessistant integrieren kann. Hat jemand von euch eine Idee?
1 „Gefällt mir“
tomg
30. September 2024 um 15:56
2
Hast Du damals eine Lösung gefunden bzw. wie machst du das
dp20eic
30. September 2024 um 20:56
3
Moin,
ob das noch funktioniert, kann ich nicht sagen, habe kein Hisense
# mqtt-hisensetv
Details on how to connect to Hisense Smart TV via the built in MQTT broker service.
Hisense Smart TV's (tested on 75P7 model) run a MQTT service on TCP port 36669 which is running mosquitto 1.4.2. This is primarily used to interact with the official hisense remote app.
## NOTE that later versions of Hisense TV's are using a encrpyted MQTT connection on the same port. You need to ensure to set encryption=on and validate=off in your client (as they are using a self signed cert.)
##NOTE some newer versions of Hisense TV's have additional checks around authentication codes.
You can send the authentication code by sending the following:
A user would need to publish
```
/remoteapp/tv/ui_service/HomeAssistant/actions/authenticationcode
{"authNum": XXXX}
```
where XXXX is the 4 digit number displayed on the screen. Once this pairing has been completed, the user than then send the other commands to change channel, power off etc.
To access this service connect via your MQTT client
with the following settings
show original
Integration of smart TVs from Hisense on Home Assistant Core
Hi all, Anyone played around with controlling the Hisense TV via it’s built in MQTT broker? It seems you can completely control the tv. I found you can connect to the MQTT service with the following: Host: IP Address of your TV Port: 36669 ...
Reading time: 56 mins 🕑
Likes: 108 ❤
Ansonsten auch noch mal die Suchmaschine Deines Vertrauens anwerfen
VG
