Doppelte ID - gefunden!

In meiner modbus.yaml steht das hier:

# DewAir Klimasteuerung
- name: Anbau
  type: tcp
  host: 192.168.178.30
  port: 502
  timeout: 5
  sensors:
    - name: Anbau_S0_Temp
      unique_id: Anbau_S0_T
      <<: &DW_S0_T
        device_address: 1
        address: 2
        data_type: float32
        unit_of_measurement: °C
        device_class: temperature
        scan_interval: 41
    - name: Anbau_S0_Hum
      unique_id: Anbau_S0_H
      <<: &DW_S0_H
        device_address: 1
        address: 4
        data_type: float32
        unit_of_measurement: "%"
        device_class: humidity
        scan_interval: 41
    - name: Anbau_S0_Dew
      unique_id: Anbau_S0_DP
      <<: &DW_S0_D
        device_address: 1
        address: 6
        data_type: float32
        unit_of_measurement: °C
        device_class: temperature
        scan_interval: 41
    - name: Anbau_S1_Temp
      unique_id: Anbau_S1_T
      <<: &DW_S1_T
        device_address: 1
        address: 8
        data_type: float32
        unit_of_measurement: °C
        scan_interval: 41
    - name: Anbau_S1_Hum
      unique_id: Anbau_S1_H
      <<: &DW_S1_H
        device_address: 1
        address: 10
        data_type: float32
        unit_of_measurement: "%"
        scan_interval: 41
    - name: Anbau_S1_Dew
      unique_id: Anbau_S1_DP
      <<: &DW_S1_D
        device_address: 1
        address: 6
        data_type: float32
        unit_of_measurement: °C
        device_class: temperature
        scan_interval: 41
    - name: Anbau_Cond_Check
      unique_id: AnbauCC
      <<: &DW_CC
        device_address: 1
        address: 46
        data_type: uint16
        scan_interval: 41
    - name: Anbau_Target
      unique_id: AnbauTS
      <<: &DW_TC
        device_address: 1
        address: 14
        data_type: uint16
        scan_interval: 41
    - name: Anbau_S0_AbsHum
      unique_id: Anbau_S0_AH
      <<: &DW_S0_AH
        device_address: 1
        address: 51
        data_type: float32
        unit_of_measurement: g/m³
        scan_interval: 41
    - name: Anbau_S1_AbsHum
      unique_id: Anbau_S1_AH
      <<: &DW_S1_AH
        device_address: 1
        address: 53
        data_type: float32
        unit_of_measurement: g/m³
        scan_interval: 41

- name: Keller West
  type: tcp
  host: 192.168.178.31
  port: 502
  timeout: 5
  sensors:
    - name: KW_S0_Temperature
      unique_id: KellerW_S0_T
      <<: *DW_S0_T
    - name: KW_S0_Humidity
      unique_id: KellerW_S0_H
      <<: *DW_S0_H
    - name: KW_S0_Dew
      unique_id: KellerW_S0_DP
      <<: *DW_S0_D
    - name: KW_S1_Temperature
      unique_id: KellerW_S1_T
      <<: *DW_S1_T
    - name: KW_S1_Humidity
      unique_id: KellerW_S1_H
      <<: *DW_S1_H
    - name: KW_S1_Dew
      unique_id: KellerW_S1_DP
      <<: *DW_S1_D
    - name: KW_Condition_Check
      unique_id: KW_CC
      <<: *DW_CC
    - name: KW_Target
      unique_id: KW_TC
      <<: *DW_TC
    - name: KW_S0_AbsHum
      unique_id: KellerW_S0_AH
      <<: *DW_S0_AH
    - name: KW_S1_AbsHum
      unique_id: KellerW_S1_AH
      <<: *DW_S1_AH

- name: Keller Ost
  type: tcp
  host: 192.168.178.33
  port: 502
  timeout: 5
  sensors:
    - name: KO_S0_Temperature
      unique_id: KellerO_S0_T
      <<: *DW_S0_T
    - name: KO_S0_Humidity
      unique_id: KellerO_S0_H
      <<: *DW_S0_H
    - name: KO_S0_Dew
      unique_id: KellerO_S0_DP
      <<: *DW_S0_D
    - name: KO_S1_Temperature
      unique_id: KellerO_S1_T
      <<: *DW_S1_T
    - name: KO_S1_Humidity
      unique_id: KellerO_S1_H
      <<: *DW_S1_H
    - name: KO_S1_Dew
      unique_id: KellerO_S1_DP
      <<: *DW_S1_D
    - name: KO_Condition_Check
      unique_id: KO_CC
      <<: *DW_CC
    - name: KO_Target
      unique_id: KO_TC
      <<: *DW_TC
    - name: KO_S0_AbsHum
      unique_id: KellerO_S0_AH
      <<: *DW_S0_AH
    - name: KO_S1_AbsHum
      unique_id: KellerO_S1_AH
      <<: *DW_S1_AH

- name: Aussenküche
  type: tcp
  host: 192.168.178.32
  port: 502
  timeout: 5
  sensors:
    - name: Aussenküche_S0_Temp
      unique_id: Aussenk_S0_T
      <<: *DW_S0_T
    - name: Aussenküche_S0_Hum
      unique_id: Aussenk_S0_H
      <<: *DW_S0_H
    - name: Aussenküche_S0_Dew
      unique_id: Aussenk_S0_DP
      <<: *DW_S0_D
    - name: Aussenküche_S1_Temp
      unique_id: Aussenk_S1_T
      <<: *DW_S1_T
    - name: Aussenküche_S1_Hum
      unique_id: Aussenk_S1_H
      <<: *DW_S1_H
    - name: Aussenküche_S1_Dew
      unique_id: Aussenk_S1_DP
      <<: *DW_S1_D
    - name: Aussenküche_Condition_Check
      unique_id: Aussenk_CC
      <<: *DW_CC
    - name: Aussenküche_Target
      unique_id: Aussenk_TC
      <<: *DW_TC
    - name: Aussenküche_S0_AbsHum
      unique_id: Aussenk_S0_AH
      <<: *DW_S0_AH
    - name: Aussenküche_S1_AbsHum
      unique_id: Aussenk_S1_AH
      <<: *DW_S1_AH

Ich bekomme aber Warnungen im Logfile und kann mir nicht erklären, wie die entstehen:

2024-07-11 11:20:27.696 WARNING (MainThread) [homeassistant.components.modbus.validators] Modbus Anbau/sensor.Anbau_S1_Dew address Anbau6_holding_1 is duplicate, second entry not loaded!
2024-07-11 11:20:27.697 WARNING (MainThread) [homeassistant.components.modbus.validators] Modbus Keller West/sensor.KW_S1_Dew address Keller West6_holding_1 is duplicate, second entry not loaded!
2024-07-11 11:20:27.697 WARNING (MainThread) [homeassistant.components.modbus.validators] Modbus Keller Ost/sensor.KO_S1_Dew address Keller Ost6_holding_1 is duplicate, second entry not loaded!
2024-07-11 11:20:27.697 WARNING (MainThread) [homeassistant.components.modbus.validators] Modbus Aussenküche/sensor.Aussenküche_S1_Dew address Aussenküche6_holding_1 is duplicate, second entry not loaded!

Irgendetwas übersehe ich…

[Edit]
Gefunden! Nicht die ID ist doppelt, die Registeradresse 6 ist doppelt verwendet! C&P-Fehler, müsste eigentlich 18 sein.